SIMATIC
S7-SCL V 5.6 for S7-300/400
Security Information:
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement - and continuously maintain - a holistic, state-of-the-art industrial security concept. Siemens' products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines and components should only be connected to the enterprise network or the internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into account. For more information about industrial security, please visit
http://www.siemens.com/industrialsecurity
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer's exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under
Notes on installation and usage
These notes should be considered more up-to-date than the information in other documents.
Read the notes carefully, because they contain important information on installing and using S7-SCL V5.6.
Version S7-SCL V5.6 is abbreviated as "S7-SCL" in the following.
To print the file, set the left and right margins to a width of 25 millimeters (1 inch) for A4 portrait size.
Contents
1 Corrections and Changes for S7-SCL
1.1 Changes from S7-SCL V5.6
Notes on Installation
2 Contents of the Consignment
3 Hardware Requirements
4 Software Requirements
4.1 Operating Environment
4.2 Hard Disk Space
4.3 Compatibility to STEP 7
4.4 Upgrading an Older Version of S7-SCL
5 Installation
5.1 Installing S7-SCL
5.2 License Key for S7-SCL
5.3 Removing S7-SCL
Release Notes
6 Note on Compatibility with DIN EN 61131
7 Using Texts in Foreign Languages
8 Notes on Programming and Operation
9 Notes on the S7-SCL Debugger
10 Notes on the Documentation
The operating systems MS Windows 10 Pro and Enterprise, MS Windows Server 2012 and MS Windows Server 2016 are supported.
Note on error message: Internal error – no code generation
This error can be caused by complex formulas.
In this case the block can be compiled without error if the compiler option “Create debug info” is selected and the compiler option “Optimize object code” is cleared.
The installation notes contain important information that you will require to install the S7-SCL software. Read these notes before installing the software.
This DVD contains the complete package for S7-SCL-Version V5.6.
This version is in 5 languages and can be run on the operating systems listed in chapter 4.1.
S7-SCL Version V5.6 is supplied on the DVD "S7-SCL V5.6" with a floating or upgrade license in the consignments described below:
S7-SCL, V5.6 (Floating License)
Order number: 6ES7811-1CC06-0YA5
The package includes:
· 1 DVD S7-SCL V5.6
· 1 License stick
· 1 Certificate of license
S7-SCL V5.6 Upgrade (Floating License) (V3/V4/V5/V5.1/V5.2/V5.3 -> V5.6)
Order number: 6ES7811-0CC06-0YE5
· 1 License stick (upgrade license)
Contents of the DVD S7-SCL V5.6
· S7-SCL V5.6
· Information about the product "What's New"
· Electronic manual "S7-SCL - Getting Started"
· Electronic manual "S7-SCL for S7-300 and S7-400"
The manuals are available on your computer following installation.
In order to be able to work with the S7-SCL software, the requirements for operating STEP 7 must be fulfilled (refer to STEP 7 readme file)
Operating Systems
S7-SCL V5.6 is released for the following operating systems :
· MS Windows 7 Ultimate, Professional and Enterprise (64-bit), with SP1
· MS Windows 10 Pro and Enterprise (64-bit)
· MS Windows Server 2008 R2 (64-bit) with SP1 (Standard Edition as work station computer)
· MS Windows Server 2012 R2 (64-bit) (Standard Edition as work station computer)
· MS Windows Server 2016 (64-bit) (Standard Edition as work station computer)
The capability of running S7-SCL on any other operating systems is not guaranteed. Use on other operating systems is at the user’s own responsibility..
S7-SCL V5.6 requires approx. 50 MB on your hard disk.
The disk space required by STEP 7 must also be taken into account here (see the STEP 7 Readme file).
S7-SCL V5.6 requires at least one of the following versions of STEP 7:
· STEP 7 V5.5 SP1
· STEP 7 V5.6
Installation of the upgrade package requires a valid license for S7-SCL V3.x, V4.x, V5.0, V5.1, V5.2 or V5.3.
Note:
Please note that an upgrade may call for a change of operating systems, because older operating systems (for example, MS Windows XP) are no longer supported as of S7-SCL V5.6 (cf. chapter 4.1). Additional notes on installation are included in the product information.
Before changing operating systems, the existing authorization/license key with the program AuthorsW/Automation License Manager must be backed up on a floppy disk or USB stick.
When installing S7-SCL V5.6 you can overwrite existing installations of S7-SCL. Older versions do not need to be uninstalled.
Before starting the Setup program, close all applications (such as MS Word, etc.) and the "Control Panel" window.
Insert the S7-SCL-DVD in the drive. The Setup program guides you through the installation. The installation program starts automatically when you insert the S7-SCL DVD. If you have disabled the automatic start function for your computer, find the program using the Windows Explorer and start it manually by double-clicking on it in the root directory of the DVD.
Note
STEP 7 and S7-SCL register themselves in MS Windows system files. You cannot move or rename STEP 7 or S7-SCL files or folders using Microsoft Windows utilities such as the Explorer or modify STEP 7 or S7-SCL data in the Microsoft Windows registry. After such modifications, it is possible that the program will no longer run properly.
The security settings of your system are modified during installation so that you can use STEP 7: Port 4410 for TCP is entered as an exception in the Windows Firewall.
Before you can start working with S7-SCL, you must transfer the license key from the license stick to the computer. There are two ways of doing this:
· While you are installing STEP 7, the Setup program displays a message if there is no suitable license key installed on your computer. You can then decide whether you want the license key to be installed by the Setup program or whether you want to install the license key manually at a later time using the Automation License Manager program.
· If the license key cannot be installed during setup, continue the Setup program without installing the license key. Then restart your computer and install the license key using start menu command Siemens Automation\Automation License Manager.
Buziol_1969