03096.pdf

(46 KB) Pobierz
52 MB Smartdrive (250-4124)
Jumper Settings
Faxback Doc. # 3096
The SmartDrive has 3 pairs of jumper pins near the 40 pin connector at the
rear of the drive.
┌────────┬───────────────┬────────────────────────────────────────────┐
│
Jumper
│
Setting
│
Function
│
├────────┼───────────────┼────────────────────────────────────────────┤
│
DS
│
jumpered*
│
Indicates this drive is the master drive
│
│
DS
│
not Jumpered
│
Indicates this drive is a slave drive.
│
├────────┼───────────────┼────────────────────────────────────────────┤
│
DM
│
Installed
│
Indicates that a ProDrive P40At or P80AT
│
│
│
│
is installed on the bus.
│
│
DM
│
not Jumpered*
│
Indicates that no proDrive P40At or P80AT
│
│
│
│
is installed on the bus.
│
├────────┼───────────────┼────────────────────────────────────────────┤
│
SP
│
Jumpered
│
Enables self-seek mode.
│
│
SP
│
not Jumpered*
│
Disables self-seek mode.
│
└────────┴───────────────┴────────────────────────────────────────────┘
NOTE: * represents default settings.
┌──────────────────────────────────────────────┐
│Jumper
Configuration for Single Drive System:
│
└──────────────────────────────────────────────┘
DS
Jumpered
DM
Not Jumpered
SP
Not Jumpered
┌─────────────────────────────────────────────────────────────────────────┐
│Daisy
Chain (two drive), Jumper Configuration for Primary (master) Drive:│
└─────────────────────────────────────────────────────────────────────────┘
DS
Jumpered
DM
Not Jumpered
SP
Jumpered
* Note: The owner's manual may state that SP and DS should not be jumpered
at the same time. The manual is incorrect.
┌──────────────────────────────────────────────────────────────────────────┐
│Daisy
Chain (two drive), Jumper Configuration for Secondary (slave) Drive:│
└──────────────────────────────────────────────────────────────────────────┘
DS
Not jumpered
DM
Not jumpered
SP
Not jumpered
(css 07/29/93)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin