04356.pdf

(46 KB) Pobierz
DMP-240
(260-2839)
RAM Upgrade
Faxback Doc. # 4356
┌──────────────────────────────────────────────────────────────────────┐
│
OPTIONAL RAM
│
│
│
│
The expansion RAM chip (Cat.No. 26-2853) expands the printer's
│
│
temporary memory to 40K bytes (internal 8K plus an additional 32K).
│
│
Take your printer to a Radio Shack Service Center to have the chip
│
│
installed. Installation MUST be done by Service Center.
│
└──────────────────────────────────────────────────────────────────────┘
┌──────────────┐
│Menu
Options:
│
└──────────────┘
The OPTN RAM Group appears only when you define macros with the optional
RAM chip installed. Press SELECT when the SPECIAL/SET? message appears
after the CHR TABLE menu group. The settings in this menu are common to
all four macros.
The setup menu option will display on the LCD as follows:
Group
SPECIAL
Item
OPTN RAM
Set
BUFFER, DOWNLOAD
Note: BUFFER is the default mode.
The optional RAM can be used in one of two ways for the IBM emulation of
the DMP-240. The additional 32-K byte RAM area can be used as an additional
receive buffer (BUFFER), or an IBM font download area (DOWNLOAD).
The Epson mode of the printer will only allow the optional ram to be used
as an additional receive buffer (BUFFER). If (DOWNLOAD) is selected, the
optional RAM area is disabled.
(css 07/27/93)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin