USB Driver Installation for Windows XP.pdf

(186 KB) Pobierz
Ross-Tech: VCDS: USB Driver Installation for Windows XP
Diagnostic Software for VW-Audi Group Cars
Shop Info F.A.Q. Download/Update Manual Upgrades Literature
881 Sumneytown Pike, Lansdale PA 19446, USA
Loading
Home
Products
VCDS
Product Information
Discontinued Interfaces Current Interfaces
USB Driver Installation for XP
USB Driver Installation for Vista / Windows7
USB Driver Installation Instructions for VCDS and Windows XP
Notes:
VCDS should install the drivers automatically. These instructions are only to be used in case the
automatic driver installation is not successful. These instructions are for Windows XP. Installation under
Windows 98/ME/2000 is similar, but not necessarily identical.
1.
2.
Make sure you have already downloaded and installed VCDS on your PC before following these instructions.
If you haven't yet downloaded VCDS, then click
HERE to open our download page in a new window.
Allow the software you just downloaded to install itself on your PC.
If you choose to install it someplace other than the default location,
make a note of folder you're installing it to.
Plug your Ross-Tech USB Interface to your PC's USB port (It is
not
necessary to connect the interface to a car
yet). A message like this should appear on your PC's Taskbar:
3.
NOTE:
If the new Hardware Found Wizard popup does not appear when you plug in your interface, go into
Device Manager and look for the interface. In Windows XP, you can typically find the Device Manager by
RIGHT-
CLICKING
on My Computer then selecting Manage. Your Ross-Tech USB Interface should be under
Universal
Serial Bus (USB) Controllers
or under
Other Devices.
If it's there, Right-Click it and then select
Update
Driver.
Then you can start at Step 4 in the instructions below.
4.
The New Hardware Found Wizard should appear:
1z4
Ross-Tech: VCDS: USB Driver Installation for Windows XP
5.
6.
On the screen above, select "Install
from a list or specific location (Advanced)"
then click the [Next
>]
button.
The following dialog should appear:
7.
On the screen above:
Select "Search
for the best driver in these locations"
Check "Include
this location in the search:"
Use the [Browse] button to find the VCDS folder
(Usually
C:\ross-tech\VCDS\
unless you chose a different folder when you installed the software)
Click [OK]
8.
The following dialog should appear:
9.
10.
Click the [Next
>]
button.
If you get a Windows message stating "This hardware will not be installed. Contact your system administrator"
then you need to do the following
A) Login to Windows with Administrator rights.
2z4
Ross-Tech: VCDS: USB Driver Installation for Windows XP
B) Go into Start -> Settings -> Control Panel -> System -> Hardware -> Driver Signing
C) Select Warn and choose "Prompt me each time to choose an action."
D) Next, repeat the driver installation starting in Step 3.
11.
The following dialog should appear:
This dialog warns you that we haven't paid Microsoft a pound of flesh to certify the driver.
You're going to have to click the [Continue
Anyway]
button..:-) Note: If your Windows Security Settings policy is
"undefined' you may need to
set it to "warn" to be able to continue.
12.
The following dialog should appear:
13.
14.
Click the [Finish] button to complete the installation.
Start VCDS.
Click the [Options] button.
In the "Select COM Port" box, select
USB.
Click the
[Test]
button.
The results should look like this (it may have additional information in the Port Test dialog).
3z4
Ross-Tech: VCDS: USB Driver Installation for Windows XP
15.
16.
Click
[OK]
and click
[Save]
Go test it on a car. :-)
Note:
If you run into problems with this procedure (make sure to try the suggestions in step 3), feel free to
Contact us
while you are in front of your PC, connected to your vehicle.
Home
Products
VCDS
Product Information
Discontinued Interfaces Current Interfaces
USB Driver Installation for XP
USB Driver Installation for W98/ME
4z4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin