A92x_Unlocking_Problem.txt

(1 KB) Pobierz
Dear customer, 

We've found that MSS 4.0.0.3b may not let you to unlock A920/A925/A1000 phones due to software bug. As a workaround, do the following: 

Connect the phone in flash mode (using the USB repair cable) and let windows install the driver. Then press 2 top buttons (you will see BP is on CE-bus) and let windows install the second driver. 

Now power on the phone, let it boot, press the "unlock this phone now" button and when you will see "AP is on CE bus" quickly press 2 top buttons to enable BP mode. When the software will ask you to do the same operation again, do nothing and just press OK. 

Sorry for this and thank you for your understanding and cooperation. 

Advanced users: 

Please don't try to make any modifications if you don't know what do you do! 

You can increase the Wait-For-Flash-Mode timeout, to do so, please: 

1. Go to registry and locate HKCU\Software\MSSBox.com tree. 
2. Create a REG_SZ value called "FlashTimeout" 
3. Set the desired value in milliseconds (e.g. 1000 means 1 second)
Zgłoś jeśli naruszono regulamin