How to set alarm to send Email
If you want to monitor a zone fixed, when the zone has exception, it enables alarm, you can choose motion detection function. Settings like below. The equipment can support 4 zones setting, you can enable it through tick the option box at the bottom of page. When enable a zone, the zone box will display on the screen, and list zone number, moving mouse to this zone box, you can drag the box to any position; also can move mouse to red box at the bottom right corner, drag it to change the size. After setting, click apply, motion detection will take effect.
When alarm triggered, the equipment will alarm with many ways, as shown in below picture:
Ø send alarm and pictures to email
Ø send captured pictures to assigned FTP server
Ø send video recording to assigned FTP server
Ø capture a picture, then save to TF Card
Ø Recording a video for 15 seconds, then save to TF card (including 1-3 seconds warning before video)
Ø linkage Preset: after the alarm, call preset
Ø alarm capture quanity, setting as required (1-3 pieces)
If you want set Email alarm, please tick ”E-mail Alarm and Send with Picture”. and then click “Email setting”
3. Setting Email
The items in above picture is mandatory fields need to fill in. If the filled content is not qulified, the setting will not be successful. After writing completed, click Apply firstly, then testing, it will reminder testing successfully when finished.
Note:
1. The server of sending email should support POP3 protocol. In order to strengthen security and reduce spam, Many mail server closed this protocol at present. So users need to check if the server support POP3 before choose mail server, otherwise the mail can not send successfully.
2.For some mail server using SSL certificate, it must enable SSL option, then can send email successfully.
The equipment will trigger alarm only after detected alarm in protection period. So you need to select which time to set protection carefully.
Note: When setting time, please adjust system time firstly.
wolferin