NIALM01GBDT.PDF

(11 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
MAKE
ALARM/SIREN
POSITION
NISSAN
MOD.
ALMERA*
YEAR.
01
→
X
* Models with original equipment keyless entry system.
Position the compact alarms and the sirens in the engine compartment, passenger’s side. Pass the
cables using the original core hitch.
The modular systems and the modules should be positioned under the driver’s side dashboard.
+30:
connect to the 2 mm
2
WHITE wire located in the wiring harness coming out of the connector of
the central doors locking unit placed on the right of the steering column, under the dashboard.
-31:
connect directly to the 2 mm
2
BLACK wire located in the wiring harness coming out of the
connector of the central doors locking unit placed on the right of the steering column, under the
dashboard.
+15/54:
Connect to the 1,5 mm
2
BLUE wire located in the wiring harness coming out of the connector
of the central doors locking unit placed on the right of the steering column, under the dashboard.
Connect to the BLACK/GREEN wire with SILVER references and to the YELLOW/GREEN wire with
SILVER references located in the wiring harness coming out of the central doors locking unit placed
on the right of the steering column, under the dashboard.
Positive control signal
Front window, driver’s side:
cut the the GREEN/RED wire.
Front window, passenger’s side:
cut the RED/WHITE wire.
Rear window, driver’s side:
Cut the YELLOW wire.
Rear window, passenger’s side:
cut the GREEN/WHITE wire.
These connections must be done in the wiring harness coming out of the connector of the original
push-button panel, in the driver’s side door.
Connections antitheft/vehicle
Art.3800
Vehicle
Position
GREY/BLACK
WHITE/BLACK (Motor )
on the coming out of the central unit
YELLOW/BLACK
RED/BLACK (Motor)
on the coming out of the central unit
VIOLET/WHITE
ground
car body
ORANGE
GREEN/BLACK (BLK)
on the coming out of the central unit
VIOLET
YELLOW/GREEN (BLK)
on the coming out of the central unit
ORANGE/WHITE
ground
ground
All the connections mentioned above are in the coming out of the central doors locking unit
located on the right of the steering column, under the driver’s side dashboard.
Gasoil pump
Cut the BROWN wire with SILVER references located in the wiring harness coming out of the 16 way
white connector, in the fuse box, under the driver’s side dashboard.
+50:
Cut the BLACK/WHITE wire located in the connector of the ignition key.
Install an additional switch on the front headlamp support grill, driver’s side.
Connect to the 1mm
2
RED/WHITE wire located in the wiring harness coming out of the connector of
the central doors loking unit placed on the right of the steering column, under the dashboard.
Connect to the 1 mm
2
BLACK/WHITE wire located in the wiring harnes coming out of the connector
of the rear lamp. Install a diode.
CENTRAL UNIT POSITION
POWER SUPPLY
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
ACTIVAT./DEACTIVATION
CONTROLS
IMMOBILISATION POINT
STARTER
BONNET SWITCH
DOORS SWITCH
BOOT SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
nialm01gbdt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin